Product information :
Scope of application: suitable for the threading operation of galvanized pipe iron pipe PP pipe pipe
Rated voltage range: AC single-phase and DC 50V above 250V and below
Supply voltage : 220
Power Type : AC Power

Operation guide:
1. Select the corresponding die head, pull out the circlip, and install it on the host from the right
2. Clamp and clamp the pipe, about the same length as the lever arm (L2 is about the same length as L1)
3. Put the positive and negative switch on the down arrow position to start the switch and the auxiliary contact
4. Refuel in time when covering hard pipes such as galvanized pipes and copper pipes; plastic pipes do not need to be refueled
5. Be careful not to contact the main machine during the right movement of the pipe clamp, otherwise it will damage the main machine
6. After the machine is stable, pull the reverse switch to the up arrow position and exit the pipe


Packing list:
Electric threading machine *1